Contents

The basic offer comprises the following elements:The basic offer comprises the following elements:

• Modem
• 5v Power
• User manual (datasheet CD)
• attenna (a standard deported cellular phone antenna)
• RS232 interface serial link cable
• speakerphone and microphone

Basic offer

The Basic offer set is presented in a unique conditioning, Which external dimensions are close to the following values:

70mm (width) x 60mm (height) x135mm (length)

This is a cardboard box. It is build-in small waves, which are covered with a thin film of white ice-cold paper.

It has a 1.5m line and >3db amp.

RF architecture

The RF part is based on a specific dual band chip and includes:

• 2 dedicated down converters
• IF demodulator
• All local RF & IF VCO
• PLL
• Transmit loop (modulator, down mixer, phase frequency comparator)
• 2 power amplifiers

RF frequencies

The RF functionalities comply with the Phase II EGSM 900/GSM 1800 or GSM 1900 recommendation:

• Rx (EGSM): 925 to 960MHz
• Tx (EGSM): 880 to 915MHz
• Rx (GSM 1800): 1805 to 1880MHz
• Tx (GSM 1800): 1710 to 1785MHz
• Rx (GSM 1900): 1930 to 1990MHz
• Tx (GSM 1900): 1850 to

RF performances

1) Receiver

• EGSM 900 sensitivity: < -102 dBm
• GSM 1800/1900 sensitivity: <-102 dBm
• Selectivity @ 200 KHz: > 9 dBc
• Selectivity @ 400 KHz: > 41 dBc
• Dynamic range: > -43 dBm
• Co-channel rejection: >= 9 dBc

2) Transmitter

• Maximum output power for EGSM 900: 33dBm ± 2dB
• Maximum output power for GSM 1800/1900: 30dBm ± 2dB
• Minimum output power for EGSM 900: 5dBm ± 5dB
• H2 level: < -30 dBm
• H3 level: < -30 dBm
• Phase error at peak power: <5° RMS
• Frequency error: ± 0.1 ppm max

Antenna specifications

• Frequency band: Dual band E-GSM 900Mhz – GSM 1800MHz/GSM 1900Mhz
• EGSM 900 GSM 1800 GSM 1900
• Rx band 925-960MHz 1805-1880Mhz 1930-1990MHz
• Tx band 880-915Mhz 1710-1785Mhz 1850-1910MHz
• Impedance: 50
• VSWR Tx max 2:1 / Rx max 2:1
• Typical radiated gain: 0dBi